Dahua 1MP ( DHI- VTO2111D-WP) Villa Outdoor Station D120 H105

Login to view prices

IP Villa Door Station

> High definition camera; WDR
>Operating temperature -30*C  +60*C
>IP65(Silicone sealant is needed. For details, see the quick start guide.)
>Supports auto IR illumination and D/N
>Card/app remote/indoor monitor unlock
>Supports two-way voice call; support calls between door stations and app
>10,000 cards
>Tamper Alarm
>Support standard PoE power supply
>Control two locks

SKU: 1268 Category:

Description

System
Main Processor Embedded processor
Operating System Embedded LINUX operating system
Button Type Mechanical
Interoperability ONVIF
Internet Protocol SIP; P2P; IPv4; DNS; RTSP; RTP; TCP; UDP
Baisc
Camera 1/4 1MP CMOS high definition, low illumination/WDR, color/IR
Angle of View Horizontal: 107*; vertical: 61*; diagonal: 122*
WDR Yes
Noise Reduction 3D noise reduction
Video Compression H.264
Video Resolution Main stream: WVGA, 720P, D1Sub stream: CIF, WVGA, QVGA, 1080P, D1
Frame Rate PAL: 25 fps NTSC: 30 fps
Video Bit Rate 256K to 4M
Light Compensation Auto IR
D/N ICR auto switch
Audio Compression G.711a; PCM; AAC
Audio Input 1
Audio Output Built-in speaker
Audio Mode Two-way voice call
Audio Enhancement Echo suppression and cancellation/digital noise reduction
Audio Bit Rate 16KHz, 16Bit
Function
Communication Full digital
Unlock Mode Card/App remote/indoor monitor unlock
Card Type IC card
Motion Detection Video motion detection
Auto Snapshot Auto snapshot can only be enabled on indoor monitors
Leave Photos and Messages Yes (SD card is needed)
Web Configuration Yes
Performance
Card Reading Distance 3cm-5cm
Casing PC+Acrylic
Capacity
Card 10,000
Port
RS-485 1
Electric Lock 1
Exit Button 1
Door Status Detection 1
Lock Control 1, normally closed by default
Network 1 10Mbps/100Mbps network port (8-core white ribbon cable)
Alarm
Tamper Yes
General
Color Black
Power Supply Mode 12V DC 1A
Standard PoE
Installation Surface mount
Certifications CE
FCC
UL
Accessory Brackets and alarm ribbon cable
Dimensions 135mm x 70.4mm x 34.4mm
Protection Grade IP65 (silicone sealant is needed, see the quick start guide)
Operating Temperature -30*C to +60*C (-20*F to +60*F )
Operating Humidity 10%RH?90%RH (non-condensing)
Operating Altitude Beneath 3000 m (9842.52 ft)
Power Consumption Standby 1W, working 5W
Gross Weight 326 g (0.72 lb)

Related products

Contact Us

Email: info@cttech.com.au

Phone: (03) 8315 7672

Mobile: 0403 471 613

Trading Hours:

Monday – Saturday : 9:00AM – 5:00PM

Sunday : CLOSED


CT Technology Solution

Unit 23/68 Eucumbene Dr
Ravenhall VIC 3023

Copyright © 2024. CT Technology Solutions Pty Ltd. All Rights Reserved.

"> ');